Six Safe Methods to Install a Second Storey Addition to a House Foundation

December 12, 2011 | Author: | Posted in Family Issues

If you’re thinking about including a second storey to your existing house, you need to assess the current foundation, determine area needed, reinforce foundation, take out the roof, construct the ceiling and also walls, and put trusses.

As your own family grows bigger, so does your necessity for additional space. Instead of acquiring a new property, you could think about incorporating an additional storey to your existing home framework. Some people like it this way because they like the place of their existing house, and it may end up being less expensive compared to purchasing a totally new location.

Assess present foundation

Before you proceed with the home extension project, it is advisable that you get recommendations from licensed home addition contractors to decide if your present foundation is sturdy enough to back up an additional storey. An additional storey requires strong walls and also support beams in order to carry the excess weight. The very first thing the professionals will do is assess the current condition of the wall surfaces, check for rotten wood, and look into the durability of the concrete. Once you have acquired their affirmation, you can now move on with the next stage of the project.

Ascertain area needed

After obtaining the green light from home addition contractors, you may move on to determine the necessary area of your second storey addition. In order to do this, it would help to start by deciding the number of rooms you’d want to have on the second floor. This will help you set aside the necessary amount of space for the extension. You should decide this from the start, to help you plan where you can put these extra rooms and start drawing out the floor plans for extension.

Enhance foundation

You’ll need to make sure that the foundation of your property is strong. Parts that will require reinforcement include your ceiling beams and wall surfaces because these will keep the majority of the weight. It is vital to strengthen the walls with 2 by 4 studs in case your existing walls aren’t strong enough. After you’ve finished the reinforcement, find someone to come in and assess it before proceeding.

Eliminate the roof

For you to start construction, you’ll need to take away your existing roof. You will need to hire a crane to have this particular part done. In case you don’t have expertise in this area, you must get some expert assistance in order to minimize damage to the structure of your house. Once the roof is removed, you can put in the ceiling and also floor joints.

Construct the ceiling and also walls

Having stripped your property of the roof, you can start building the ceiling and the walls of the second storey. The ceiling and floor joints must be no less than one foot thick and 12 inches wide in order to be enough. For much better assistance, it is required that the ceiling, as well as joint support, need to be 16 to 24 inches apart. Construct your wall structures next as these will act the partitions between every space and form the rooms of the second story.

Add trusses

Trusses are necessary to support the roof and ceiling. These are generally made of a structure of beams which will hold the weight of the roofing. After you have set up these and all the necessary plumbing and electrical wiring, you can then replace the roof tiles, and focus on the finishing touches on the interior and exterior walls.

It is essential to stay safe and perform the work in gradual ways instead of rushing through it all. A good foundation and solid build up will no doubt result in lasting results, and your house could last many generations to come.

Written by Ella B. Spada. If you are searching for great home addition contractors, click on http://www.alcoaconstruction.com/additions/second-story-addition/

Author:

This author has published 29 articles so far. More info about the author is coming soon.

Leave a Reply